Step 2 Select WIFI Frequency Band: Press the Menu button at the top of the screen until you get to the Wifi Info screen. The first option you will see is 2.4G WIFI Info or if you hit the Menu button again you will get 5G Wifi Info. The "G" Wifi Frequency bands are not cellular frequency bands so do not confuse the Wifi 5G with cellular 5G. Connect one end of the USB-C cable to the Airspeed Mobile Hotspot and the other end to your Wi-Fi device. The USB Connection option menu will pop up when the device is connected properly. Choose options: “Access internet (USB & Wi-Fi)” or “Access internet (USB only)” to activate. a connection via tethering. From the Elevate Manager, click Device Security. Click the SSID field, then enter the desired network name. To change the password click the Wi-Fi Key field and enter the desired password. Click Save. With my Android phone (6.0 aka Marshmallow), if I use tethering through USB or Bluetooth my PC sees an Ethernet-type connection with an address in the 192.168.X.Y range (typical of small local networks). Android. Head into Settings > Wireless & Networks > Tethering & Portable Hotspot > Portable Wi-Fi Hotspot > toggle on Portable Wi-Fi Hotspot after setting a password. Once you’re done, you can connect any Wi-Fi-enabled device to the phone’s hotspot in the same way you’d connect to any new Wi-Fi network. . Enabling the HotSpot feature on your printer turns your printer into a Wi-Fi HotSpot that offers secure wireless Internet access for up to eight clients.The HotSpot feature supports the average day-to-day office activities (Internet browsing, emailing, file sharing, sending instant messages, etc.) for computers, smart phones, or tablets. Steps to follow to fix failed to obtain IP address. Forget and connect back to the network. Click on Settings. Select the option of “Wi-Fi”. Select the network that has failed to connect. Long press on it for more option to be displayed. Click forget to remove the network from your saved networks. Step 1: Assign a static IP to your local computer that is hosting the FTP server. Step 2: Log in to the Gateway, and go to Settings > Features > Port Forwarding. Step 3: Set WAN Port to 21; Set LAN IP Address to be the static IP of computer; and Set LAN port to 21. Step 4: Click “Apply” to activate. . Go to Settings > Network & internet > Hotspot & tethering. Touch Wi-Fi hotspot and turn it on. When your hotspot is active, you'll see in the status bar. Tip: The first time you turn the hotspot on, is added to quick settings. After that, just swipe the status bar down and touch to turn the hotspot off/on. And about your IP address. In case you’re wondering about the IP address you are using at a hotspot, it’s whatever the IP address is for that wireless network… and everyone using that particular Wi-Fi is sharing the same IP address. Next time you’re at a hotspot, visit WhatIsMyIPAddress.com to see the IP address you’re actually using.

how to change mobile hotspot ip address